Searching for Everlast siding reviews usually means you are torn between vinyl and fiber cement and wondering if there is something in between. Everlast composite siding aims to be that middle ground: thicker and more solid than vinyl, lighter than fiber cement, and never in need of paint. Here is what it is made of, what reviewers like and dislike, and who it suits best.
In this article
What is Everlast composite siding?
Everlast Advanced Composite Siding is made in the USA by Chelsea Building Products. According to Everlast, the boards are made from inorganic minerals, polymer resins and acrylic colorants, so the color runs through the material. It comes in lap siding and a one-piece board and batten style.
What Everlast siding reviews praise
- No painting or caulking. The manufacturer says Everlast never needs paint or caulk, which saves money over the life of the siding.
- Moisture resistance. Everlast describes the boards as virtually impervious to water and says they will not swell, bow, split or rot, a real plus in humid East Tennessee.
- Lighter than fiber cement. Prudent Reviews weighed a 12-foot, 6-7/8 inch board at 7.8 lb, compared with 18.8 lb for a comparable fiber cement plank.
- Solid, wood-like look. Reviewers note it looks and feels more substantial than vinyl on the wall.
- Strong warranty. A limited lifetime warranty for the original owner, which becomes a 50-year prorated warranty for the next owner if you sell.
Common complaints in Everlast siding reviews
- Higher up-front cost than vinyl.
- Fewer color choices than paintable fiber cement, since colors are built in.
- Fewer experienced installers. Reviewers point out it is newer to many crews, and like any siding, results depend on installation.
- Painting is not an option. Prudent Reviews notes that painting Everlast can void the warranty, so pick a color you will love long term.
How Everlast composite siding is installed
Installation is where Everlast differs most from fiber cement. According to the manufacturer, Everlast composite siding:
- cuts with standard tools and does not create harmful silica dust when cut,
- is less than half the weight of fiber cement, so crews can handle long boards more easily,
- uses an EZStack joinery system and does not need flashing behind the seams.
Those claims are why many Everlast siding reviews mention a cleaner job site. Still, composite boards must be fastened and spaced to the manufacturer’s instructions, so ask how many Everlast jobs your installer has completed.
How Everlast holds up in East Tennessee
Knoxville gets about 48 inches of rain a year, along with humid summers and the occasional freeze. Siding here has to shrug off moisture without swelling, peeling or growing mildew in the seams. Everlast’s mineral-and-resin boards are designed not to absorb water, which is the main reason homeowners in humid climates shortlist it. Like any siding, it still depends on good flashing at windows, doors and roof lines, which is why we inspect and repair the wall before any new siding goes on.
What to look for when reading Everlast siding reviews
- Check whether the review is from a homeowner, an installer or a manufacturer. Each has a different point of view.
- Look for comments about installation quality, not just the product. Most siding problems start with how it was put on.
- Note the date. Products, colors and warranties change, so recent Everlast siding reviews are more useful than old ones.
- Ask your contractor to show you an Everlast home they finished, so you can see it in person.
Everlast vs vinyl vs fiber cement
| Vinyl | Everlast composite | Fiber cement | |
|---|---|---|---|
| Painting | Never | Never (manufacturer claim) | Periodic repainting |
| Feel on the wall | Thin, flexible | Thick, rigid | Thick, rigid |
| Weight | Lightest | Light | Heaviest |
| Installed cost (one estimate)* | $5–$12 / sq ft | $10–$18 / sq ft | $10–$20 / sq ft |
*Cost estimates quoted by Prudent Reviews from HomeAdvisor data. Other guides use different ranges, so treat these as ballpark figures and see our siding replacement cost guide for more detail.
Still deciding between the big two? Read vinyl vs fiber cement siding for a side-by-side comparison.
Who should choose Everlast composite siding?
Everlast is a strong fit if you want a solid, upscale look, never want to paint again and plan to stay in your home long enough to enjoy the low upkeep. If the lowest price is the priority, quality vinyl is hard to beat. If you want the widest color range and noncombustible siding, fiber cement is the better match.
American Home installs Everlast composite siding across Knoxville and East Tennessee. Learn more on our Everlast composite siding page.
Want to see and hold Everlast before you decide? Call (865) 459-7753 or request a free estimate. We will bring samples and price Everlast next to vinyl and fiber cement for your home.
Everlast siding FAQ
Is Everlast siding better than Hardie board?
It depends on your priorities. Everlast is lighter and never needs paint. James Hardie fiber cement is noncombustible and offers more colors. Both are premium options.
Does Everlast siding fade?
Everlast’s warranty covers excessive color change, along with peeling, cracking and blistering. Ask your installer to walk you through the warranty terms.
Who makes Everlast siding?
Chelsea Building Products manufactures Everlast composite siding in the USA.
